Select Page

China FUJI Stainless Steel Passenger Elevator Hotel Cabin Lift Commercial Elevator torque limiter bar

Product Description

PASSENGER ELEVATOR
 

Product Description

We can do each machine room and non-machine space passenger elevators

Passenger Elevator(MR)

The launch of Asia CZPT modest personal computer space elevator has led the elevator industry to move towards little machine space equipment configuration. Tiny machine space elevator can satisfy the two passenger and freight transportation they are suited for workplace, hotel, household constructing and skyscraper.Asia CZPT small device room elevator is driven by permanent magnet gearless traction machine to make sure safe and trustworthy procedure, lower sound and greater functionality.
Small device place,space-saving,reduced the price,high effectiveness

The use of modest equipment place elevator engineering not only speeds up the building development and guarantees the clean operation of the design undertaking, but also easy to exchange the traction machine when it needs to be modified, whilst the traditional drive technique are not able to satisfy such a hassle-free transformation.
 

Passenger Elevator(MRL)
With the improvement of science and technological innovation,MRL elevator was designed by Asia CZPT Elevator,which was additional to the interior with no destroying the authentic visual appeal of historic properties. This technologies has achieved everlasting magnet gearless traction
MRL elevator soon after numerous trials and experime

Product Parameters

Modest device place passenger elevator parameters

Potential  (Kg) Particular person Speed
(m/s)
Entrance(mm) Distinct automobile dimension (mm) Caroutstide dimension (mm) Distinct hoistway dimension (mm) Equipment area dimension (mm) Pit depth
(mm)
Overhead Height
(mm)
Pit reaction load
(KN)
 
Device space reaction load(KN) Rated energy
(KW)
Power provide
capability
Direct-in wire
Q NO. V OP CWXCD SWXSD HWXHD MWXMDXMH PD OH R1 R2 R3 R4 KW KVA MM2
450 6 1. 700 1200×1100 1252×1266 1800×1800 1800x1800x2200 1500 4400 50 40 20 8 three three.6 4
1.5 1600 4500 four.eight five.eight four
630 8 1. 800 1400×1100 1452×1266 2000×1800 2000x1800x2200 1500 4400 68 54 24 10 four.3 five.two 4
one.five 1600 4500 six.8 eight.2 six
800 10 1. 800 1400×1350 1452×1516 2000×2050 2000x2050x2200 1500 4400 76 60 28 12 five.four six.5 6
one.5 1600 4500 8.6 ten.three 6
1.seventy five 1700 4600 9.six eleven.5 six
2. 1800 4700 eleven thirteen.2 6
1000 13 one. 900 1600×1450 1652×1616 2200×2200 2200x2200x2200 1500 4400 90 72 32 15 six.four seven.7 six
one.five 1600 4500 10.7 twelve.eight six
1.75 1700 4600 11.seven fourteen six
two. 1800 4700 thirteen.four sixteen.one ten
two.5 2000 4900 seventeen 20.four 10
four. 3800 5900 27.seven 31.five 10
1250 16 one. 1000 1800×1550 1852×1716 2400×2300 2400x2300x2200 1500 4400 105 80 36 18 eight.five ten.2 six
one.5 1600 4500 thirteen.5 6.two 10
one.seventy five 1700 4600 fourteen.8 seven.eight ten
two. 1800 4700 seventeen twenty.4 10
2.five 2000 4900 22 26.4 10
4. 3800 5900 34.six 39.6 ten
1350 18 1. 1100 1900×1600 1952×1766 2500×2300 2500x2300x2200 1500 4400 115 90 40 20 9.3 eleven.two 6
one.5 1600 4500 fourteen.9 seventeen.9 ten
one.75 1700 4600 16.three 19.6 ten
two. 1800 4700 18.seven 22.four 10
2.5 2000 4900 23.four 28.one ten
four. 3800 5900 36.eight 44.two 10
1600 21 one. 1200 2000×1700 2052×1866 2600×2400 2600x2400x2200 1500 4400 136 105 48 26 11 13.2 6
1.five 1600 4500 17.five 21 ten
1.seventy five 1700 4600 19 22.eight 10
2. 1800 4700 22 26.4 ten
two.5 2000 4900 27.five 33 ten
four. 3800 5900 34.two 41 ten

 
Device area considerably less passenger elevator parameter

Ability  (Kg) Particular person Speed
(m/s)
Entrance(mm) Clear automobile dimension (mm) Auto outside dimension
(mm)
Distinct hoistway dimension
(mm)
Pit depth
(mm)
Overhead Peak
(mm)
Pit reaction
 load
(KN)
 
Load-supporting beam  reaction  load
(KN)
Rated energy
(KW)
Power provide
capability
Lead-in wire
Q NO. V OP CWXCD SWXSD HWXHD PD OH R1 R2 R3 R4 KW KVA MMtwo
630 8 one. 700 1200X1300 1252X1466 2000X1900 1500 4000 68 54 24 10 four.three 5.two four
1.six 1600 4200 6.eight 8.2 6
800 10 1. 800 1300X1450 1352X1616 2100X2000 1500 4000 76 60 28 12 5.four six.five six
1.six 1600 4200 eight.6 ten.3 6
one.seventy five 1700 4300 9.six eleven.5 6
two. 1800 4400 eleven 13.2 six
1000 13 one. 900 1450X1600 1502X1766 2300X2000 1500 4000 90 72 32 15 6.four seven.seven 6
1.6 1600 4200 ten.seven twelve.8 six
one.seventy five 1700 4300 11.seven 14 six
2. 1800 4400 thirteen.4 16.1 10
2.5 2000 4500 seventeen twenty.4 ten
1250 16 one. 1000 1800X1550 1852X1716 2600X2050 1500 4200 105 80 36 18 8.five ten.two 6
one.6 1600 4300 13.five sixteen.two 10
1.seventy five 1700 4400 fourteen.8 17.8 ten
2. 1800 4500 17 twenty.4 ten
two.5 2000 4600 22 26.four 10
1350 18 1. 1100 1900X1600 1952X1766 2700X2050 1500 4200 115 90 40 20 nine.3 11.2 6
one.six 1600 4300 14.9 seventeen.nine ten
one.seventy five 1700 4400 sixteen.3 19.6 10
2. 1800 4500 18.seven 22.4 ten
two.five 2000 4600 23.four 28.1 10
1600 21 one. 1200 2000X1700 2052X1866 2900X2150 1500 4200 136 105 48 26 11 thirteen.two 6
1.six 1600 4300 17.five 21 10
one.75 1700 4400 19 22.eight ten
two. 1800 4600 22 26.4 ten
2.five 2000 4800 27.5 33 ten

Cabin style type

Undertaking Showcase

Geographical Positive aspects and Robust Complex Electrical power
 

Our Rewards

 

Substantial-Stop Clever CONTROL SYSTEM

Asia CZPT Elevator adopts VLSI and microcomputer management technique has greatly reduced the size of the control cabinet, which can be achieved by using only a tiny kind of manage cupboard irrespective of the floor level.

 

The 32-little bit digital parallel central processing unit is used to process digital indicators and magnetic flux vector calculations of the motor at substantial speeds in various operating speeds of Fuji Elevator Asia.
It has a torque bias operate to compensate for load changes, 
digital automatic speed regulator ASR method, and Fuji’s unique speed detection circuit to achieve the world’s maximum degree of higher-precision speed handle (accuracy is .01% of the greatest pace , The resolution is .005% of the greatest speed of soil),the latest online tuning technology of Fuji Asia has the 
function of automatically compensating the rated parameters according to temperature changes.
Therefore, the elevator is utilised to ensure substantial-precision and substantial-reliability control in the atmosphere of lengthy-term operation and temperature fluctuations.

Employing dual 32-bit parallel central processing units for higher-velocity processing, CZPT most innovative twin closed-loop (distance closed-loop, speed closed-loop) system ensures that the highest and cheapest speeds (minimum velocity of 5 rpm) can accomplish High precision and quickly reaction control.At the identical time,it has four-quadrant operation and opinions function.In accordance to the elevator working direction and passenger excess weight (how many people),it can covert the weight into an electric signal and feed it back again to the central parallel processing device for calculation and management the motor to output the most affordable torque,best comfort and ease running effect.

MINIATURE Strength-Preserving HOST Technique

The latest long lasting magnet gearless tractor was employed to change the traditional worm gear traction device,which acknowledging the ultra small dimensions,light-weight weight of the traction equipment, also eliminating the mechanical use in between gears.
 

It can preserve energy by much more than sixty% when compared with the earlier elevator technologies, and meet up with the environmental safety specifications of bare minimum vibration, bare minimum device area, no want for oil, routine maintenance-free with minimum sound,

It is a significant technological breakthrough for AC elevator that the higher-pace procedure of CZPT Elevator. With distribution and knowledge comparison system, which routinely adjusts in accordance to the circulation of individuals to make the elevator operate evenly and comfortably, additional enhancing the elevator’s working effectiveness.

Most elevator producers generally use power-consuming braking to dissipate energy in resistors.CZPT Elevator drag method with a regenerative braking unit (regenerative braking),has the potential to transfer strength in 4-quadrant procedure and suggestions to the grid. As a result, it can save energy by 50% compared to regular AC elevator and 20% than common FM elevator, which significantly lowers the functioning price of elevators.
 

 

VVVF FM management method&Substantial technological innovation

FUJI Elevator uses a low-noise vector-controlled inverter to regulate frequency, voltage, and pace (VVVF), which is an important symbol of large-functionality elevator right now. At the very same time, the world’s most innovative IGBT is utilized to enable the inverter to accomplish higher-frequency PWM control, which significantly decreases the sound of the motor,electricity consumption, and extends the lifestyle of the motor directly.

 

Firm Profile

INTRODUCTION OF ASIA CZPT ELEVATOR

Asia CZPT Elevator (HangZhou) Co., Ltd. is a joint-stock company that integrates the analysis and advancement, design, generation, product sales and installation and upkeep of various elevators,found in Xihu (West Lake) Dis. County, HangZhou City, ZheJiang Province,which has a whole area of three hundred acres and a overall investment decision of 1.3 billion yuan is a key investment attraction of HangZhou City in 2015. At existing, the business has attained honors like the “Nationwide Quality Inspection Secure and Qualified Products“, “National Top quality and CZPT Excellent Organization” honor certification and “Large-tech Company” and has gained eleven patents in the elevator industry.

The test tower, which integrates elevator and stereo garage inspection and testing, is 159 meters higher,speed up to 10m / s, and the clever stereo garage is 109 meters higher. No. 1 take a look at tower in North China.

Facing the new regular of the financial system, Asia CZPT Elevator will build toward high-stop, clever, and Web of Issues.Facilitate elevators and smart

three-dimensional garages to update their products, progress the production business to slicing-edges, and rapidly achieve the grand objective of “based on China, going through Asia, and going world-wide”! In the next 5-10 a long time, Asia CZPT Elevator will react to the national “A single Belt and 1 Street” policy,just take ZheJiang as the base, ZheJiang , ZheJiang , HangZhou, and HangZhou as the window, and set up branches overseas and set up prodcution bases in Southeast Asia. gradually make products to the world to achieve rapid improvement.

 

Developing the chief of elevator business
one.Interpretation of production integration
Our production commitment sophisticated engineering,trustworthy good quality, excellent services realistic price

two.Routine maintenance is lifestyle, coaching is survival.
Excellent complex maintenance is an indispensable guarantee for risk-free and cozy operation of elevators, escalators and sidewalks. Even if the
essence of contemporary technology is gathered, tough and durable elevate raise can not stop put on and growing older. For this explanation, mechanical products is often held in the ideal issue, and maintenance of the result in for troubleshooting and mishaps is crucial

three.Each undertaking has a separate expert servicing undertaking crew
FUJI Elevator in Asia adopts person response and meticulous and
considerate safety companies for each and every elevator’s use. Even a small screw can not nerane cfrint inerertian

Packaging & Shipping

 

FAQ

Q1.Why choose us?
A:Asia CZPT Elevator is a joint-stock company integrating elevator R & D, design, generation, sales,
installation and maintenance. Renowned brand, currently be verified by several consumers Domestic and abroad Sample assignments are buyers voice for our quality.

Q2. What info is totally necessary ahead of asking for price?
A:1. How a lot of folks? ( 6 people for 450kg,8 persons for 630kg, 10 folks for 800kg and so forth..)
2. How several flooring/ stops/ doorways?
3. What is the shaft dimensions? (width by depth)
4. Is there a machine space on the best of shaft?

Q3. How can we guarantee the excellent top quality of your items?
A:In for the duration of the production procedure we will inspect all purchased and created elements and just take a record after put in crates, just before shipping and delivery out we will do the closing inspection and mock up the cabin and sling set, this component take photograph and video as report to make client getting at ease. 

This fall: What is actually the payment phrase?
A:30% in progress, 70% right after customers inspection, ahead of loading

Q5. What about the packaging?
A:All elevator elements will be packed into strong wood cases. Some components will be wrapped by the movie so that promise the machinery portion not be ruined soon after lengthy time transportation.

Q6. How to do with the elevator set up and upkeep?
A: We can send engineers to CZPT the set up and then practice the workers about upkeep in the future. But in most circumstances, nearby employees can complete this work with our guidebooks and technology support, or you can inquire the regional specialist elevator engineers to do this task, This can save considerably cash for our client. Of course, you can get support from our manufacturing unit at any time.

Q7 . What’s your guarantee time?
A:We can provide eighteen months guarantee period, in the course of this time, we will deliver free of charge replacements to you. our services has no time restrict.

US $8,000-15,000
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Online Technical Support
Warranty: 1 Year
Driving Type: AC Elevator
Capacity: 500-1000kg
Persons: 6 – 10
Speed: 1.00 – 2.00m/s

###

Customization:

###

Capacity  (Kg) Person Speed
(m/s)
Entrance(mm) Clear car dimension (mm) Caroutstide dimension (mm) Clear hoistway dimension (mm) Machine room dimension (mm) Pit depth
(mm)
Overhead Height
(mm)
Pit reaction load
(KN)
 
Machine room reaction load(KN) Rated power
(KW)
Power supply
capacity
Lead-in wire
Q NO. V OP CWXCD SWXSD HWXHD MWXMDXMH PD OH R1 R2 R3 R4 KW KVA MM2
450 6 1.0 700 1200×1100 1252×1266 1800×1800 1800x1800x2200 1500 4400 50 40 20 8 3 3.6 4
1.5 1600 4500 4.8 5.8 4
630 8 1.0 800 1400×1100 1452×1266 2000×1800 2000x1800x2200 1500 4400 68 54 24 10 4.3 5.2 4
1.5 1600 4500 6.8 8.2 6
800 10 1.0 800 1400×1350 1452×1516 2000×2050 2000x2050x2200 1500 4400 76 60 28 12 5.4 6.5 6
1.5 1600 4500 8.6 10.3 6
1.75 1700 4600 9.6 11.5 6
2.0 1800 4700 11 13.2 6
1000 13 1.0 900 1600×1450 1652×1616 2200×2200 2200x2200x2200 1500 4400 90 72 32 15 6.4 7.7 6
1.5 1600 4500 10.7 12.8 6
1.75 1700 4600 11.7 14 6
2.0 1800 4700 13.4 16.1 10
2.5 2000 4900 17 20.4 10
4.0 3800 5900 27.7 31.5 10
1250 16 1.0 1000 1800×1550 1852×1716 2400×2300 2400x2300x2200 1500 4400 105 80 36 18 8.5 10.2 6
1.5 1600 4500 13.5 6.2 10
1.75 1700 4600 14.8 7.8 10
2.0 1800 4700 17 20.4 10
2.5 2000 4900 22 26.4 10
4.0 3800 5900 34.6 39.6 10
1350 18 1.0 1100 1900×1600 1952×1766 2500×2300 2500x2300x2200 1500 4400 115 90 40 20 9.3 11.2 6
1.5 1600 4500 14.9 17.9 10
1.75 1700 4600 16.3 19.6 10
2.0 1800 4700 18.7 22.4 10
2.5 2000 4900 23.4 28.1 10
4.0 3800 5900 36.8 44.2 10
1600 21 1.0 1200 2000×1700 2052×1866 2600×2400 2600x2400x2200 1500 4400 136 105 48 26 11 13.2 6
1.5 1600 4500 17.5 21 10
1.75 1700 4600 19 22.8 10
2.0 1800 4700 22 26.4 10
2.5 2000 4900 27.5 33 10
4.0 3800 5900 34.2 41 10

###

Capacity  (Kg) Person Speed
(m/s)
Entrance(mm) Clear car dimension (mm) Car outside dimension
(mm)
Clear hoistway dimension
(mm)
Pit depth
(mm)
Overhead Height
(mm)
Pit reaction
 load
(KN)
 
Load-supporting beam  reaction  load
(KN)
Rated power
(KW)
Power supply
capacity
Lead-in wire
Q NO. V OP CWXCD SWXSD HWXHD PD OH R1 R2 R3 R4 KW KVA MM2
630 8 1.0 700 1200X1300 1252X1466 2000X1900 1500 4000 68 54 24 10 4.3 5.2 4
1.6 1600 4200 6.8 8.2 6
800 10 1.0 800 1300X1450 1352X1616 2100X2000 1500 4000 76 60 28 12 5.4 6.5 6
1.6 1600 4200 8.6 10.3 6
1.75 1700 4300 9.6 11.5 6
2.0 1800 4400 11 13.2 6
1000 13 1.0 900 1450X1600 1502X1766 2300X2000 1500 4000 90 72 32 15 6.4 7.7 6
1.6 1600 4200 10.7 12.8 6
1.75 1700 4300 11.7 14 6
2.0 1800 4400 13.4 16.1 10
2.5 2000 4500 17 20.4 10
1250 16 1.0 1000 1800X1550 1852X1716 2600X2050 1500 4200 105 80 36 18 8.5 10.2 6
1.6 1600 4300 13.5 16.2 10
1.75 1700 4400 14.8 17.8 10
2.0 1800 4500 17 20.4 10
2.5 2000 4600 22 26.4 10
1350 18 1.0 1100 1900X1600 1952X1766 2700X2050 1500 4200 115 90 40 20 9.3 11.2 6
1.6 1600 4300 14.9 17.9 10
1.75 1700 4400 16.3 19.6 10
2.0 1800 4500 18.7 22.4 10
2.5 2000 4600 23.4 28.1 10
1600 21 1.0 1200 2000X1700 2052X1866 2900X2150 1500 4200 136 105 48 26 11 13.2 6
1.6 1600 4300 17.5 21 10
1.75 1700 4400 19 22.8 10
2.0 1800 4600 22 26.4 10
2.5 2000 4800 27.5 33 10
US $8,000-15,000
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Online Technical Support
Warranty: 1 Year
Driving Type: AC Elevator
Capacity: 500-1000kg
Persons: 6 – 10
Speed: 1.00 – 2.00m/s

###

Customization:

###

Capacity  (Kg) Person Speed
(m/s)
Entrance(mm) Clear car dimension (mm) Caroutstide dimension (mm) Clear hoistway dimension (mm) Machine room dimension (mm) Pit depth
(mm)
Overhead Height
(mm)
Pit reaction load
(KN)
 
Machine room reaction load(KN) Rated power
(KW)
Power supply
capacity
Lead-in wire
Q NO. V OP CWXCD SWXSD HWXHD MWXMDXMH PD OH R1 R2 R3 R4 KW KVA MM2
450 6 1.0 700 1200×1100 1252×1266 1800×1800 1800x1800x2200 1500 4400 50 40 20 8 3 3.6 4
1.5 1600 4500 4.8 5.8 4
630 8 1.0 800 1400×1100 1452×1266 2000×1800 2000x1800x2200 1500 4400 68 54 24 10 4.3 5.2 4
1.5 1600 4500 6.8 8.2 6
800 10 1.0 800 1400×1350 1452×1516 2000×2050 2000x2050x2200 1500 4400 76 60 28 12 5.4 6.5 6
1.5 1600 4500 8.6 10.3 6
1.75 1700 4600 9.6 11.5 6
2.0 1800 4700 11 13.2 6
1000 13 1.0 900 1600×1450 1652×1616 2200×2200 2200x2200x2200 1500 4400 90 72 32 15 6.4 7.7 6
1.5 1600 4500 10.7 12.8 6
1.75 1700 4600 11.7 14 6
2.0 1800 4700 13.4 16.1 10
2.5 2000 4900 17 20.4 10
4.0 3800 5900 27.7 31.5 10
1250 16 1.0 1000 1800×1550 1852×1716 2400×2300 2400x2300x2200 1500 4400 105 80 36 18 8.5 10.2 6
1.5 1600 4500 13.5 6.2 10
1.75 1700 4600 14.8 7.8 10
2.0 1800 4700 17 20.4 10
2.5 2000 4900 22 26.4 10
4.0 3800 5900 34.6 39.6 10
1350 18 1.0 1100 1900×1600 1952×1766 2500×2300 2500x2300x2200 1500 4400 115 90 40 20 9.3 11.2 6
1.5 1600 4500 14.9 17.9 10
1.75 1700 4600 16.3 19.6 10
2.0 1800 4700 18.7 22.4 10
2.5 2000 4900 23.4 28.1 10
4.0 3800 5900 36.8 44.2 10
1600 21 1.0 1200 2000×1700 2052×1866 2600×2400 2600x2400x2200 1500 4400 136 105 48 26 11 13.2 6
1.5 1600 4500 17.5 21 10
1.75 1700 4600 19 22.8 10
2.0 1800 4700 22 26.4 10
2.5 2000 4900 27.5 33 10
4.0 3800 5900 34.2 41 10

###

Capacity  (Kg) Person Speed
(m/s)
Entrance(mm) Clear car dimension (mm) Car outside dimension
(mm)
Clear hoistway dimension
(mm)
Pit depth
(mm)
Overhead Height
(mm)
Pit reaction
 load
(KN)
 
Load-supporting beam  reaction  load
(KN)
Rated power
(KW)
Power supply
capacity
Lead-in wire
Q NO. V OP CWXCD SWXSD HWXHD PD OH R1 R2 R3 R4 KW KVA MM2
630 8 1.0 700 1200X1300 1252X1466 2000X1900 1500 4000 68 54 24 10 4.3 5.2 4
1.6 1600 4200 6.8 8.2 6
800 10 1.0 800 1300X1450 1352X1616 2100X2000 1500 4000 76 60 28 12 5.4 6.5 6
1.6 1600 4200 8.6 10.3 6
1.75 1700 4300 9.6 11.5 6
2.0 1800 4400 11 13.2 6
1000 13 1.0 900 1450X1600 1502X1766 2300X2000 1500 4000 90 72 32 15 6.4 7.7 6
1.6 1600 4200 10.7 12.8 6
1.75 1700 4300 11.7 14 6
2.0 1800 4400 13.4 16.1 10
2.5 2000 4500 17 20.4 10
1250 16 1.0 1000 1800X1550 1852X1716 2600X2050 1500 4200 105 80 36 18 8.5 10.2 6
1.6 1600 4300 13.5 16.2 10
1.75 1700 4400 14.8 17.8 10
2.0 1800 4500 17 20.4 10
2.5 2000 4600 22 26.4 10
1350 18 1.0 1100 1900X1600 1952X1766 2700X2050 1500 4200 115 90 40 20 9.3 11.2 6
1.6 1600 4300 14.9 17.9 10
1.75 1700 4400 16.3 19.6 10
2.0 1800 4500 18.7 22.4 10
2.5 2000 4600 23.4 28.1 10
1600 21 1.0 1200 2000X1700 2052X1866 2900X2150 1500 4200 136 105 48 26 11 13.2 6
1.6 1600 4300 17.5 21 10
1.75 1700 4400 19 22.8 10
2.0 1800 4600 22 26.4 10
2.5 2000 4800 27.5 33 10

Choosing the Right Torque Limiter

Whether you are looking for a synchronous magnetic torque limiter, a mechanical torque limiter, a CZPT(r) Tolerance Ring, or a ball detent torque limiter, there are many options available. Hopefully this article will help you decide which type of limiter to use for your application.limiter torque

Mechanical torque limiters

Designed to safeguard the main components of a machine, mechanical torque limiters are used in various applications, including woodworking, printing and converting, industrial robots and conveyors. They provide disengagement within milliseconds when torque overload occurs. The main purpose of these devices is to protect the machine’s drive line from excessive torque. They can be installed in several parts of a machine to maximize protection.
Mechanical torque limiters come in two main types: friction and magnetic. The friction type is made up of spring loaded friction disks that slip against each other when torque exceeds a threshold. The friction disks interface with each other like an automobile clutch. The spring rate of the disks is adjusted to create the torque slip threshold. Once the threshold has been reached, the friction disks slip out of the socket and disengage the drive line.
Mechanical torque limiters are often regarded as old fashioned. However, they offer better accuracy than alternatives, making them more suitable for a variety of applications. They are easily adjustable, allowing users to customize the disengagement torque value after installation.
Mechanical torque limiters are available in various sizes and can be used in virtually any application. These devices can be placed in multiple locations throughout a machine to disengage the drive line before the electronic device. They are able to disengage the drive line in a fraction of a second, ensuring that no damage is done to the machine.
Ball and roller torque limiters are popular designs. They are available for in-line and offset transmissions. These designs are often made with wide gears to accommodate a variety of torque ranges. They are also used for industrial robots and sheet metal processing equipment.

Synchronous magnetic torque limiters

Several types of torque limiters are available. Some of these are designed to automatically reset themselves after a period of overload. Others need to be reset manually. Among these are the synchronous magnetic torque limiter, the friction plate torque limiter and the spring-loaded pawl-spring torque limiter.
The synchronous magnetic torque limiter works with a pair of strong magnets mounted on each shaft. This provides a quick response time and the ability to transmit power to other parts of the vehicle. However, these limiters can have more backlash than mechanical types.
The synchronous magnetic torque limiter can be modified to work with various types of magnets. The magnets can be made closer or further apart. This will change the torque limitation without leaving the spirit of the invention.
The friction plate torque limiter can also be used as a shaft-to-shaft coupling. This is useful for applications where the machine is constantly running. The torque limiter also prevents torsional strain on the drive shaft.
Another type of torque limiter uses hard balls that are held in place by springs. The balls detach to disconnect the drive when necessary. This is similar to a clutch. The balls can be housed in conical holes in the traction flange. The springs prevent the balls from slipping out of the flange.
Another type of torque limiter uses springs, shear pins, and other mechanical components. It’s designed to shut down the machine when there’s too much inertia. This is important because too much inertia can cause a crash. This type of torque limiter can be used to prevent catastrophic failure.
There are also torque limiters that use magnetic particles instead of magnets. These can be statically set or dynamically set.limiter torque

Ball detent torque limiters

Choosing the right torque limiter can protect your machinery against damage. They can also prevent physical injury to workers. There are several designs to choose from. Some systems offer a single position device. Others offer a random reset device. The selection is based on your application.
Ball detent torque limiters are used in applications where precise torque is required. They offer good torque density and are suitable for packaging, woodworking, textile and food processing machinery. The design of these units allows them to react quickly and accurately to an overload. They can be manually engaged or automatically engaged when an over-torque condition is corrected.
In a typical ball detent torque limiter, a number of balls or rollers are used in sockets. When the load is overloaded, the balls or rollers slide out of the sockets. The balls are made of chrome-alloy steel that is hardened to at least Rc 60.
A torque limiter is used to prevent physical injury and damage to rotating machine components. It protects expensive components. They are used in servo systems, packaging, woodworking, textile and food processing machinery, as well as a wide range of other applications.
The design of a torque limiter can cause significant wear on the detents. Therefore, the selection of a torque limiter must consider the number of components and the complexity of the design.
Some torque limiters use special methods to eliminate internal backlash. Others use a pneumatic control system. An air pressure system applies force to a piston that applies torque to the balls or rollers in the detent. The air pressure is then exhausted from an air chamber when the overload occurs.
The air pressure is also used to disengage the torque limiter in case of an accident. The pneumatic control system is also used in more advanced ball detent torque limiters.

CZPT(r) Tolerance Ring

CZPT(r) Tolerance Ring limits limiter torque to a greater extent than a conventional design. This ring comprises a resilient material band extending between a pair of components. Each of the components is statically coupled to the other. Each of the components has a pair of radial projections adapted to exert radial forces against the other. Typically, the inner and outer components rotate with respect to one another. This rotation is caused by the torque transmitted by the tolerance ring. This torque can exceed the force of interference fit.
The tolerance ring includes an outer circumference, a tangent circle 36, and a center point 38. The diameter of the tolerance ring is determined by the amount of overlap between the ends of the band. Normally, the diameter of the tolerance ring is smaller than the diameter of the unformed annular portions.
The tolerance ring may be made of metal such as spring steel. This material provides increased gripping strength and radial flexibility. However, tolerance rings can also be made of harder material. The inner component can be made of a material having a VPNIC less than the tolerance ring’s VPNTR.
The tolerance ring also includes a guide portion extending from an unformed annular portion of the band. The guide portion defines an entrance at one end of the ring. The entrance can be slanted in relation to the axis of the ring. The perimeter of the entrance is a fraction of the perimeter of the band.
The tolerance ring can also include a plurality of wave structures extending radially outward from the undeformed portion. These structures can be regular formations, such as ridges or fingers, or they can be partially disconnected from the undeformed portion. Each wave structure can have a different physical appearance. They can be arranged to have a plurality of columns, or they may be one or two rows of formations. The number of wave structures can be anywhere from a few to dozens. These structures can also be partially disconnected from the undeformed portion, allowing them to provide enhanced gripping properties.limiter torque

Challenge slip clutch/friction plate torque limiters

Choosing the right torque limiter can help you save money, prevent damage and extend the life of your machine. Typically, torque limiters are used in engines of all types of manual automobiles. They are also used in servo motor drives, conveyors, robotic applications, printing and converting machines, and in sheet metal processing equipment.
One of the most important reasons to consider a torque limiter is the protection it offers to your rotating parts. Unnecessary torque can wear out components, reduce efficiency and lead to downtime. In addition, unexpected forces can exceed the design of a mechanism. Torque limiters can also act as a clamping hub for direct drives.
Torque limiters are also useful in limiting damage from jams. These are generally cylindrical devices that are made from steel, and are used to transfer torque from a drive shaft to an output shaft. They appear to be rings, but are actually composed of an internal assembly of gears. A torque limiter can be configured for electrical actuation or manual operation.
Another important function of a torque limiter is to provide a consistent torque level. This can help reduce downtime and prevent larger, more costly accidents.
The most obvious way to achieve this is through a slip clutch. A slip clutch is a clutch that disconnects from the main drive, allowing inertia to uncouple from a jammed section. This is achieved by using a spring or a shear pin connection.
Another interesting function of a torque limiter is to allow for a longer service life of the shaft in a low-speed application. They are often used in combination with sprocket gears or timing belts. This can provide a smoother, more consistent torque level.
China FUJI Stainless Steel Passenger Elevator Hotel Cabin Lift Commercial Elevator     torque limiter barChina FUJI Stainless Steel Passenger Elevator Hotel Cabin Lift Commercial Elevator     torque limiter bar
editor by czh 2023-01-05

Tags:

Recent Posts

torquelimiter

As one of leading torquelimiter manufacturers, suppliers and exporters of mechanical products, We offer torquelimiter and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.