Select Page

China MHK-1050 Model Paper Carton Box Automatic Die Cutting Machine torque limiter for impact wrench

Product Description

MHK-1050T/MHK-1050C Fully Computerized Die Slicing Machine with Four Side Stripping for Carton Box

The MHK collection entire-computerized/very hot foil stamping/stripping/creasing die-reducing devices can successfully comprehensive the die reducing and embossing of products,as properly as maintaining the maximum precision and merchandise high quality.The MHK series total-automatic/very hot foil stamping/stripping/creasing die-slicing devices are nicely outfitted and nearly can adapt to all die cutting demands of items.

Principal features:

1. High good quality feeder created in ZheJiang with 4 suction nozzle for stack paper and 4 suction nozzle for offering paper , assures stable and quick paper feeding .

two. Pre-loading device , non-stop feeding , with Max pile peak to 1600mm.

three. The pre-loading unit is geared up with guiding rails , operator move the stack paper to feeder precisely and conveniently .

4. Side and entrance guiding have sensor which can change the sensitivity.

five. The anti-obstacle unit avert the machine destroyed.

6. Paper feeding will be gradual down when the paper achieve the front guiding , obtain far more accurate area .

7. Japanese NITA express belt , the speed can be modified .

8. Germany manufactured stainless steel is employed for convey board in buy to attain easy and swift paper delivery .

nine. Pneumatic chopping plate elevate for effortless slide in and out .

10.Simple way to flip more than and modify die chopping CZPT and plate with short time .

eleven.High quality gripper bars made in Japan with extended life time .

twelve.High high quality U.K imported chain make certain security and accuracy in lengthy time managing .

thirteen.Automated lubrication and cooling technique for principal travel and automated lubrication for main chain .

14.Overload defense device with torque limiter in index box for the maximum protection of operator and gear .

15.Crank shafts and worm rod is manufactured of 40 Cr with heating managing . Turbine is created of copper .

sixteen.Substantial good quality imported air clutch .

17.SMC pneumatic components .

eighteen.The higher , center and decrease stripping frames are controlled by 3 GPRS of cam wheels respectively.

19.Match with the centerline registration system in die chopping unit , the very same technique also utilize to the stripping station to lessen changeover time , Precise positioning can boost creation efficiency.

Principal Specs:

Model MHK-1050T/TC MHK-1050  MHK-1050CE 
Max.Sheet measurement 1050*750 mm 1050*750 mm 1050*750 mm
Min. Sheet dimension 400*360 mm 400*360 mm  four hundred* 360 mm
Max.Die minimize measurement 1040*720 mm 1040* 720mm 1040*720 mm
Max Scorching stamping size 1040*720mm  No No
Inner CZPT dimension 1080*745mm 1080*745 mm 1080*745 mm
Paper thickness

eighty-600g/m2 

corrugated significantly less than 4mm

80-600g/m2 

corrugated less than 4mm

eighty-600g/m2 

corrugated considerably less than 4mm

Accuracy considerably less than .1mm considerably less than .1mm much less than .1mm
Max. pressure 300T 300T 300T
Max die cut velocity 7500s/h 7500 s/h 7500 s/h
Max feeder pile top 1600mm(contain pallet) 1600mm(include pallet) 1600mm(include pallet)
Max shipping and delivery pile peak 1400mm(incorporate pallet) 1400mm(consist of pallet) 1400mm(incorporate pallet)
Max.foil diameter 250mm(vertical) 200mm(horizontal) No No
Foil width twenty-1571 mm No  No
Primary motor 11Kw 11Kw 11Kw
All round measurement 7700*5200*2600mm 6300*4600*2400mm 7700*4600*2400mm
Equipment excess weight eighteen.5 Ton 16 Ton seventeen Ton
Complete electricity fifty two Kw

To Be Negotiated 1 Set
(Min. Order)

###

Species: Die Cutting and Creasing Machine
Imprinting Type: Platen
Placing Form of Template: Horizontal
Die Cutting Tool: Steel Blade
Computerized: Computerized
Automatic Grade: Automatic

###

Customization:

###

Model MHK-1050T/TC MHK-1050  MHK-1050CE 
Max.Sheet size 1050*750 mm 1050*750 mm 1050*750 mm
Min. Sheet size 400*360 mm 400*360 mm  400* 360 mm
Max.Die cut size 1040*720 mm 1040* 720mm 1040*720 mm
Max Hot stamping size 1040*720mm  No No
Inner chase size 1080*745mm 1080*745 mm 1080*745 mm
Paper thickness

80-600g/m2 

corrugated less than 4mm

80-600g/m2 

corrugated less than 4mm

80-600g/m2 

corrugated less than 4mm

Accuracy less than 0.1mm less than 0.1mm less than 0.1mm
Max. pressure 300T 300T 300T
Max die cut speed 7500s/h 7500 s/h 7500 s/h
Max feeder pile height 1600mm(include pallet) 1600mm(include pallet) 1600mm(include pallet)
Max delivery pile height 1400mm(include pallet) 1400mm(include pallet) 1400mm(include pallet)
Max.foil diameter 250mm(vertical) 200mm(horizontal) No No
Foil width 20-1020 mm No  No
Main motor 11Kw 11Kw 11Kw
Overall size 7700*5200*2600mm 6300*4600*2400mm 7700*4600*2400mm
Machine weight 18.5 Ton 16 Ton 17 Ton
Full power 52 Kw
To Be Negotiated 1 Set
(Min. Order)

###

Species: Die Cutting and Creasing Machine
Imprinting Type: Platen
Placing Form of Template: Horizontal
Die Cutting Tool: Steel Blade
Computerized: Computerized
Automatic Grade: Automatic

###

Customization:

###

Model MHK-1050T/TC MHK-1050  MHK-1050CE 
Max.Sheet size 1050*750 mm 1050*750 mm 1050*750 mm
Min. Sheet size 400*360 mm 400*360 mm  400* 360 mm
Max.Die cut size 1040*720 mm 1040* 720mm 1040*720 mm
Max Hot stamping size 1040*720mm  No No
Inner chase size 1080*745mm 1080*745 mm 1080*745 mm
Paper thickness

80-600g/m2 

corrugated less than 4mm

80-600g/m2 

corrugated less than 4mm

80-600g/m2 

corrugated less than 4mm

Accuracy less than 0.1mm less than 0.1mm less than 0.1mm
Max. pressure 300T 300T 300T
Max die cut speed 7500s/h 7500 s/h 7500 s/h
Max feeder pile height 1600mm(include pallet) 1600mm(include pallet) 1600mm(include pallet)
Max delivery pile height 1400mm(include pallet) 1400mm(include pallet) 1400mm(include pallet)
Max.foil diameter 250mm(vertical) 200mm(horizontal) No No
Foil width 20-1020 mm No  No
Main motor 11Kw 11Kw 11Kw
Overall size 7700*5200*2600mm 6300*4600*2400mm 7700*4600*2400mm
Machine weight 18.5 Ton 16 Ton 17 Ton
Full power 52 Kw

CZPT(R) Tolerance Ring For Limiter Torque

Using a limiter torque ring to limit the torque of the motor is an excellent method to maintain the smoothness and efficiency of the engine. It can also help to eliminate wear and tear on the engine due to over-revving or under-revving of the engine.limiter torque

CZPT(r) Tolerance Ring

CZPT(r) Tolerance Ring is designed to limit limiter torque by providing interference fit between an inner component and an outer component. The tolerance ring is installed between a stator or compressor housing and an inner component, for example, a shaft receivable in a bore in the housing. The tolerance ring is formed of a resilient material such as spring steel.
The tolerance ring may have an outer and an inner circumference. The outer circumference may be smaller than the inner circumference and may be less than 16 mm in diameter. The tolerance ring may be formed from a sheet material. The thickness of the sheet may be less than 0.2 mm.
The tolerance ring may also include a sidewall. The sidewall includes an undeformed portion. The sidewall may be curved to form an annular ring. The tolerance ring may include one or more rows of wave structures. The wave structures may vary in shape and size, and may be located peripherally or radially around the tolerance ring.
The number of wave structures may vary, from less than 10 to more than 35. The number of wave structures may be located at the peripheral, radial, and end regions of the tolerance ring. The wave structures may be identical in size and shape, or may have different physical characteristics. The amount of torque transmitted by the tolerance ring is dependent on the stiffness of the projections. The tolerance ring can act as a force limiter or torque transmitter.
The tolerance ring may be a single-layer ring, or a two-layer ring. The first layer may be a strip or sleeve of resilient material. The second layer may be a smooth, regular surface. The first layer may be radially extending projections, a set of axially spaced protuberances, or a plurality of rounded ridges rising to a radial peak.limiter torque

CZPT TL

TL series torque converters are a good fit for a variety of applications. These products deliver a slew of benefits including a long service life and a reduced component count. They are available in several configurations including semi-open and enclosed models. They also feature air control to ensure smooth device function. The TL series is also available in multiple torque capacities ranging from a low of 1,500 lb. @ 80 psi to a high of 27,700 lb. @ 80 psi.
The TL series is equipped with several technological feats including a proximity sensor that sends a signal to a torque limiter control valve. This unit also features a single and double air pressure circuit to ensure smooth remote torque adjustment. It also features an o-ring to ensure zero air leakage.
The TL-A Series is available in sixteen models, including two with an impressive 27700 lb. @ 80 psi torque. It’s also worth noting that they can be installed in a variety of applications, including conveyors, sheet metal processing equipment, printing and converting machines and industrial robots. They are also easy to install and remove, making them a great choice for maintenance departments.
The TL-A Series also offers a number of high-end features such as a reversible shaft design and internal springs to ensure complete disengagement. They also include a hard-chrome detent interface that decreases drive-ring wear. The TL-A Series also features a single-flex coupling that delivers high shaft misalignment protection and a double-flex coupling that delivers high torsional rigidity.
TL Series torque converters are a good fit for applications that require torque in the sub-tens of thousands of pounds per square inch. They are also a good choice for industrial automation applications and can be installed in a wide variety of industries, including manufacturing, aerospace and automotive.limiter torque

IWIS FT series

FT IWIS’s FT-1000 Series aka FT IWIS’s FT t1000 series aka the FT t1000 series aka the TFT-1000 series aka the FT t1000 aka the FT t1000 FT t1000 series aka the FFT1000 series aka the FFT1000 FT t1000 aka the FFT1000 series aka FT t1000 FT t1000 FT t1000?. The FT t1000 series aka the, FT t1000 series aka the, FFT t1000 series aka the, FFT t1000 series aka FT t1000 series aka the, etc.. FT t1000 series aka the,, FFT t1000 series aka FFT t1000 series aka the FFT t1000 series aka the,.. FFT t1000 series aka the,, FT t1000 series aka FFT, FT t1000 series aka FT, FT t1000 series TA t1000 series aka the FFT, FT t1000 series, FT t1000 series aka, FFT t1000 series aka, FFT, FT t1000 series, etc.

TL-IT inline

TL-IT Inline Torque Limiter is a device that allows you to set the torque on your tools at a preset limit, and then allow the tool to run without allowing it to overtighten. This device is designed to work with low RPM power tools. It is available in four colors, and is made in the United States. It has been manufactured to NIST certification standards. It can be used to test power tools, and it is designed to control torquing through the use of a cam-over clutch action. This device also has an air-controlled positioning feature.
The TL-IT Inline Torque Limiter also has a laser marked color coded ID ring to prevent confusion if multiple tools are used. The device is also available in both metric and imperial sizes, and is certified to +/-4% accuracy in one direction.
China MHK-1050 Model Paper Carton Box Automatic Die Cutting Machine     torque limiter for impact wrenchChina MHK-1050 Model Paper Carton Box Automatic Die Cutting Machine     torque limiter for impact wrench
editor by czh 2023-01-06

Recent Posts

torquelimiter

As one of leading torquelimiter manufacturers, suppliers and exporters of mechanical products, We offer torquelimiter and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of bush chains

We specializing in the production of Agricultural Gearbox, PTO Shafts, Sprockets, Fluid Coupling, Worm Gear Reducers, Gears and racks, Roller Chains, Sheave and Pulleys, Planetary Gearboxes, Timing Pulleys, Shaft Collars and more.

We have exported our products to clients around the world and earned a good reputation because of our superior product quality and after-sales service.

We warmly welcome customers both at home and abroad to contact us to negotiate business, exchange information and cooperate with us.